Ground is broken for the planned production area expansion

On account of the continuing high demand we have decided to expand our production facilities. The useful floor space will be enlarged from 15,000 m² to 17.000 m², with a supported height of 14 m!

Our company is going to install the following for you in the new production hall:

• an annealing furnace measuring 20,5 x 7,5 x 5 m
• a sandblasting cabin and
• a painting line measuring 18 x 7,5 x 6 m
  in line with the very latest quality and environmental aspects

The new production facilities are to be ready at the end of March 2007. The whole building will be set up as a pre-fabricated component structure made of reinforced concrete, taking the latest heat insulation aspects into account

In both parts of the new hall building, two each gantry cranes systems which can be used over the complete length of the hall areas will be ready for use, with a hook height of 9 m.

Highlights

1. Heat treatment

• Temperatures up to 700°C
• 10 light-fuel oil burners
• Temperature registration, 6-fold
• Temperature program controller, freely programmable
   
• Interior dimensions (L x W x H):
  20.3 m x 7.5 m x 5.4 m

2. Surface treatment

• Ceiling structure can be opened and closed for crane equipping
• 2 free-jet pressure blasters
• Integrated grit preparation
• Cast steel blasting agent
   
• Interior dimensions (L x W x H):
  18.0 m x 7.5 m x 7.5 m

3. Surface coating

• Extraction filter system: 33,000 m³/h
• Illuminance level: 1,000 Lux
   
• Interior dimensions (L x W x H):
  18.0 m x 7.5 m x 7.5 m